基于荧光强度比值法可用于现场测量的低成本聚合物光纤温度传感器

基于荧光强度比值法,设计了一种使用两种荧光染料的光纤温度传感器.实验中,罗丹明B和罗丹明110分别为对温度敏感和对温度不敏感的荧光传感物质,利用聚合物光纤来传导激发光及接收荧光.由于两种染料的荧光谱峰相距60 nm,因此容易将二者对应的荧光谱分开.通过确定能代表两种染料的最优荧光光谱范围,获得具有良好线性度的温度-荧光强度标定曲线.实验研究了不同浓度的荧光染料对标定曲线的影响,当染料浓度为0.3 g/L时,可获得0.28℃的最小均方误差及0.0128/℃的灵敏度.此外,该传感器还具备一定的抗光源扰动和抗荧光染料漂白的能力.     

The Effects of a Mathematics Infusion Curriculum on Middle School Student Mathematics Achievement

Increasing mathematical competencies of American students has been a focus for educators, researchers, and policy makers alike. One purported approach to increase student learning is through connecting mathematics and science curricula. Yet there is a lack of research examining the impact of making these connections. The Mathematics Infusion into Science Project, funded by the National Science Foundation, developed a middle school mathematics‐infused science curriculum. Twenty teachers utilized this curriculum with over 1,200 students. The current research evaluated the effects of this curriculum on students' mathematics learning and compared effects to students who did not receive the curriculum. Students who were taught the infusion curriculum showed a significant increase in mathematical content scores when compared with the control students.     

Characteristics of Second Graders' Mathematical Writing

This study compared the characteristics of second graders' mathematical writing between an intervention and comparison group. Two six‐week Project M2 units were implemented with students in the intervention group. The units position students to communicate in ways similar to mathematicians, including engaging in verbal discourse where they themselves make sense of the mathematics through discussion and debate, writing about their reasoning on an ongoing basis, and utilizing mathematical vocabulary while communicating in any medium. Students in the comparison group learned from the regular school curriculum. Students in both the intervention and comparison groups conveyed high and low levels of content knowledge as indicated in archived data from an open‐response end‐of‐the‐year assessment. A multivariate analysis of variance indicated several differences favoring the intervention group. Both the high‐ and low‐level intervention subgroups outperformed the comparison group in their ability to (a) provide reasoning, (b) attempt to use formal mathematical vocabulary, and (c) correctly use formal mathematical vocabulary in their writing. The low‐level intervention subgroup also outperformed the respective comparison subgroup in their use of (a) complete sentences and (b) linking words. There were no differences between groups in their attempt at writing and attempts at and usage of informal mathematical vocabulary.     

A numerical method for reconstructing the coefficient in a wave equation

We present a numerical method for reconstructing the coefficient in a wave equation from a single measurement of partial Dirichlet boundary data. The original inverse problem is converted to a nonlinear integral differential equation, which is solved by an iterative method. At each iteration, one linear second‐order elliptic problem is solved to update the reconstruction of the coefficient, then the reconstructed coefficient is used to solve the forward problem to obtain the new data for the next iteration. The initial guess of the iterative method is provided by an approximate model. This model extends the approximate globally convergent method proposed by Beilina and Klibanov, which has been well developed for the determination of the coefficient in a special wave equation. Numerical experiments are presented to demonstrate the stability and robustness of the proposed method with noisy data.© 2014 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 289–307, 2015     

Long distance atomic teleportation with as good success as desired

Long distance atomic teleportation (LDAT) is of prime importance in long distance quantum communication. Scheme proposed by Bose et al. (1999) in principle enables us to have LDAT using cavity decay. However it gives message state dependent fidelity and success rate. Here, using interaction of entangled coherent states with atom–cavity systems and a two-step measurement, we show how, LDAT can be achieved with unit fidelity and as good success as desired under ideal conditions. The scheme is unique in that, the first measurement predicts success or failure. If success is predicted then second measurement gives perfect teleportation. If failure is predicted the message-qubit remains conserved therefore a second attempt may be started. We found that even in presence of decoherence due to dissipation of energy our scheme gives message state independent success rate and almost perfect teleportation in single attempt with mean fidelity of teleportation equal to 0.9 at long distances. However if first attempt fails, unlike ideal case where message-qubit remains conserved with unit fidelity, in presence of decoherence the message-qubit remains conserved to some degree, therefore mean fidelity of teleportation can be increased beyond 0.9 by repeating the process.     

Optical extensometer and elimination of the effect of out-of-plane motions

A novel optical extensometer is developed to estimate the local uniform strain on planar surface accurately. The proposed system consists of a shared large format lens and two image sensors, which acquire pairs of images of two isolated small regions on the object surface simultaneously. Digital image correlation (DIC) algorithm is applied to determine the relative displacement between gauge points designated on recorded pairs of images. Then local strain can be extracted after dividing the relative displacement by the scale distance. Moreover, a special experimental setup called “correction sheet” is used to eliminate the virtual strain induced by out-of-plane motions. Uni-axial tensile experiments are performed to validate the reliability and resolution of the optical extensometer, and the measurement results demonstrate that the resolution of the optical extensometer achieves 2–3 με.     

激光诱导热光栅光谱测温技术研究

报道了激光诱导热光栅光谱测温技术的研究. 通过两束相干交叉的脉冲抽运光, 在NO₂/N₂混合气中诱导出热光栅, 一束满足布拉格散射条件的连续探测光在交叉区域激励出相干的热光栅信号, 经过空间和光谱滤波的信号光由光电倍增管探测, 并由数字示波器显示和存储. 该信号携带了丰富的流场信息, 通过频域分析, 对气体的温度进行了测量, 热光栅光谱技术测量的温度与热电偶温度符合得很好. 同时还利用热光栅光谱技术进行了气体声速的直接测量, 在一定的温度范围内, 测量结果与理论曲线基本一致, 显示了该技术具有较高的测量精度与多参数同时测量的能力. 对影响信号波形的因素进行了分析, 结果表明, 热光栅光谱测温技术在高压强环境下应用具有独特的优势, 是一种应用前景广阔的激光燃烧诊断技术.     

基于CCD对高斯光束进行实时判断及特性参数的测量

主要使用等距四点采光测量法,用CCD进行采样,电脑编程处理来判断、分析和研究高斯光束的光强在空间的分布情况——传播特性。并利用计算机可以实时判断激光器输出是否为高斯光束,如是高斯光束,还可以实验测得高斯光束的径向强度分布、束径以及扩散角。     

相干态统计特性的弱测量结构研究

理论分析相干态位移参数估计在弱测量方法下的放大效应.引入偏振态作为附属态(Ancilla States),分别进行初选择和后选择,中间的相互作用采用了偏振相关的弱位移操作算符.通过最后检测光子数的分布来估计位移参数;在牺牲检测光子强度的情况下可以有效提高放大效应.     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.